Black Box LES1208A-R2 User Manual Download Page 148

Page: 148 / 286

_____________________________________________________________________

724-746-5500 | blackbox.com

Page 148

Note

All

console server

s have the

snmptrap

daemon to send traps/notifications to remote SNMP

servers on defined trigger events as detailed above. LES1408A, LES1416A, LES1432A,
LES1448A, LES1308A, LES1316A, LES1332A, LES1348A,

LES1208A-R2, LES1216A-R2,

LES1232 and LES1248A-R2

console server

s also embed the

net-snmp

daemon. It accepts

SNMP requests from remote SNMP management servers and provides information on network
interface, running processes, etc. (refer to

Chapter 15.5—Modifying SNMP Configuration

for

more details).

7.5.4 Nagios alerts

To notify the central Nagios server of Alerts, NSCA must be enabled under

System: Nagios

and Nagios

must be enabled for each applicable host or port under

Serial & Network: Network Hosts

Serial &

Network: Serial Ports

(refer to Chapter 10).

7.6 Logging

The

console server

can maintain log records of auto-response events and log records of all access and

communications events (with the

console server

and with the attached serial, network and power

devices).

A log of all system activity is also maintained by default, as is a history of the status of any attached
environmental monitors.

7.6.1

Log storage

Before activating

any

Event, Serial, Network or UPS logging, you must specify where those logs are to be

saved. These records are stored off-server or in the

console server

USB flash memory.

Summary of Contents for LES1208A-R2































































































































































































































































































Search results

Summary of Contents for LES1208A-R2

Reviews:

Related manuals for LES1208A-R2

Brands by name

Popular brands

Black Box LES1208A-R2, User Manual

Search results

Summary of Contents for LES1208A-R2

Reviews:

Related manuals for LES1208A-R2

Brands by name

Popular brands