_____________________________________________________________________
724-746-5500 | blackbox.com
Page 114
Click
OK.
6.2.8 Dial in configuration
If the client PC is dialing into
Local/Console
port on the
console server,
you will need to set up a dial-‐in
PPP link:
Configure the
console server
for dial-‐in access (following the steps in the
Configuring for Dial-‐In
PPP Access
section in
Chapter 5
,
Configuring Dial In Access
).
Set up the PPP client software at the remote
User
PC (following the
Set up the remote Client
section in
Chapter 5
).
Once you have a dial-‐in PPP connection established, you then can set up the secure SSH tunnel from the
remote Client PC to the
console server
.
6.3
SDT Connector to Management Console
You can also configure
SDT Connector
for browser access to the
console server’s
Management Console
—and for Telnet or SSH access to the command line. For these connections to the
console server
itself,
you must configure
SDT Connector
to access the Gateway itself by setting the Gateway (
console server)
up as a
host
, and then configuring the appropriate services:
Launch
SDT Connector
on your PC. Assuming you have already set up the
console server
as a
Gateway
in your
SDT Connector
client (with
username/ password
etc.), select this newly added
Gateway
and click the Host icon to create a host. Or, select
File -‐> New Host.
Enter 127.0.0.1 as the
Host Address
and provide details in
Descriptive Name/Notes
. Click OK.
