_____________________________________________________________________
724-746-5500 | blackbox.com
Page 143
Specify the
Recipient Email Address
to send this email to and the
Subject
of the email. For
multiple recipients you can enter comma separated addresses
Edit the
Email Text
message to send and click
Save New Action
Note
An SMS alert can also be sent via an SMTP (email) gateway. You will need to specify the
Recipient Email Address
in the format specified by the gateway provider (e.g. for T-Mobile it is
phonenumber
@tmomail.net)
7.3.2
Send SMS
Click on
Send SMS
as the
Add Trigger Action
. Enter a unique
Action Name
and set the
Action Delay Time
Specify the
Phone number
that the
SMS will be sent to in international format (without the +)
Edit the
Message Text
to send and click
Save New Action
Note:
The SMS alert can only be sent if there is an internal or external USB cellular modem attached.
However an SMS alert can also be sent via a SMTP SMS gateway as described above.
7.3.3
Perform RPC Action
Click on
Perform RPC Action
as the
Add Trigger Action
. Enter a unique
Action Name
and
set the
Action Delay Time
Select a power
Outlet
and specify the
Action
to be performed (power On, OFF or Cycle)
Click
Save New Action
7.3.4
Run Custom Script
Click on
Run Custom Script
as the
Add Trigger Action
. Enter a unique
Action Name
and
set the
Action Delay Time
Create a script file to execute when this action is triggered and enter the
Script Executable
file name e.g.
/etc/config/action.sh
Set the
Script Timeout
(i.e. the maximum run-time for the script). Leave as 0 for unlimited.
Enter any
Arguments
that are to be passed to the script and click
Save New Action
7.3.5
Send SNMP Trap
Click on
Send SNMP Trap
as the
Add Trigger Action
. Enter a unique
Action Name
and set
the
Action Delay Time
Note:
The SNMP Trap actions are valid for Serial, Environmental, UPS and Cellular data triggers only
7.3.6
Send Nagios Event
Click on
Send Nagios Event
as the
Add Trigger Action
. Enter a unique
Action Name
and
set the
Action Delay Time
Edit the
Nagios Event Message
text to display on the Nagios status screen for the service
Specify the
Nagios Event State
(
OK, Warning, Critical
or
Unknown
) to return to Nagios for
this service
