ServReach™ KVMultiport
50
50
Please note!
All the functions set out in the Help window are performed from the Main window. The Help window is
merely a reminder of the hotkeys and their functions.
12.10
Scanning computers – F4
Where necessary adjust the scan time in the Time Settings window, see above.
To activate scanning:
1. Press Shift twice to open the OSD.
2. Press
F4
. Your screen displays each active computer sequentially, with the Scan label
appearing in the top left corner.
To deactivate scanning:
Press
F4
.
12.11
Tuning – F5
You can tune the image of any computer screen from the Select Computer window.
To adjust the screen image:
1. Navigate to the computer you wish to adjust.
2. Press
F5
. The screen image of the selected computer appears, together with the Image
Tuning label.
3. Adjust the image by using the
Right
and
Left
Arrow keys.
4. When the image is satisfactory, press
Esc
.
Note!
Picture quality is relative to distance. The further away a remote computer is from the KVMultiport, the
lower the image quality, and the more tuning needed. So place the higher resolution computers closer to
the Switch.
12.12
Moving the label – F6
Position the Confirmation label anywhere on the screen.
To position the label from the Main window:
1. Navigate to the desired computer using the
Up
and
Down
arrow keys.
