ServReach™ KVMultiport
44
44
From this window you can do the following:
12.3.1.1
Security
The OSD comes with an advanced password security system that contains 3 different
security levels. Each security level has different access rights to the system.
These levels are as follows:
12.3.1.2
Administrator (Status A)
The Administrator can:
•
Set and modify all Passwords and security profiles
•
Fully access any computer
•
Use all OSD functions
12.3.1.3
Supervisor (Status S)
The Supervisor
can:
•
Fully access any computer
•
Access the following OSD functions only –
F4
Scan,
F5
Tune
and
F6
Moving the
Confirmation label.
12.3.1.4
User (Status U)
There are 6 different Users in the KVMultiport system. Each User has a Profile set by the
Administrator that defines the access level to different computers. There are 3 different
access levels - explained on page 48.
12.3.1.5
Activating password protection
By default OSD access is not password protected. Only the Administrator can password-
protect the OSD or disable password protection.
To do so:
1. In the General settings window navigate to the Security line.
2. Press the Space bar to toggle between Security On and Off. The password box appears.
3. Type the Administrator’s password (default is “admin”).
4. Press
Enter
. The new security status is set.
