ServReach™ KVMultiport
34
34
9.9.1
Aligning the mice pointers
When accessing the Target Server, the mice may appear at a distance to each other.
To align the mouse pointers:
From the Toolbar click
/
Align
or press
Ctrl+M
simultaneously. The mice align.
9.9.2
Calibrating mice pointers
A Target Server may have a different mouse pointer speed to the Client computer.
Calibrating automatically discovers the mouse speed of the Target Server and aligns the two
pointers.
To perform the calibration when the Target Server Operating system is, Windows NT4, 2000
or 98:
From the Toolbar click
/
Calibrate
. KVMultiport saves this alignment so calibration is
only needed once per Target Server.
If the Video Noise Level is above zero, calibration may not work. Go to Video Adjustment
and try to eliminate the noise by pressing Auto video adjust and/or adjusting the bars in
Manual video adjust, then perform the mouse calibration.
Note!
If the mouse settings on the Target Server were ever changed, you must synchronize mouse pointers
manually, as explained below.
9.9.3
Manual mice synchronization
If the mouse settings on the Target Server were ever changed, or when the Operating system
on the Target Server is, Windows XP / 2003 Server / Vista, Linux, Novell, SCO UNIX or
SUN Solaris you must synchronize the mouse pointers manually.
To manually synchronize mouse pointers:
1. From the Toolbar click
/
Manual Settings
. The
Mouse Settings
Dialog box appears
see Figure 24.
