Chapte
r 2: Installation
724-746-5500 l www.blackbox.com
20
Installation options
CAUTION:
To reduce the risk of electric shock or damage to your equipment, disconnect the power from the
InvisaPC Receiver or Transmitter by unplugging the power supply from the electrical outlet. To reduce the
risk of electric shock or damage to your equipment, turn on the remote workstation and the InvisaPC
Transmitter in the order described in the following procedures.
You can install the InvisaPC system with the InvisaPC Receiver either on a point-
to-point or networked configuration.
Point-to-point installation
In a point-to-point configuration, no administrator setup of the InvisaPC Transmitter or
the InvisaPC Receiver is required. This enables you to install the system quickly,
directly out-of-the-box. However, in the point-to-point configuration, you can install
only one InvisaPC Transmitter and InvisaPC Receiver pair on a subnet, and both must
be on the same subnet unless a router is present in the network to span subnets.
Figure 3 - Point-to-point installation
