Black Box InvisaPC DTX1000-R Installation And User Manual Download Page 51 | Manualshive

Page: 51 / 58

background image

Chapter 3 : Operations

724-746-5500 l www.blackbox.com

51

Transmitter Information

The

Information

button provides transmitter related information such as Device Model, Serial

Number, MAC address, and current Firmware Version to the administrator.

If the active IP address is not the address of a valid InvisaPC Transmitter or this address is
unreachable, an error message is returned.

Transmitter Upgrade

The administrator can click the

Upgrade

button to change the firmware on a transmitter. The

upgrade file is selected from the set of files on an attached USB drive. These files will have the
extension .clu . The selected file is checked to be a valid transmitter upgrade file prior to starting
the upgrade. The OSD will provide a series of screens to walk the user through the process.

The upgrade can take several minutes to complete and the power to the Transmitter and the
Receiver

must not

be disconnected during the upgrade. During the upgrade process the Transmitter

may re-boot a couple of times.

If the active IP address is not the address of a valid InvisaPC Transmitter or this address is
unreachable, an error message is returned.

Transmitter Restore Factory Defaults

The administrator can click the

Restore

button to reset the transmitter back to factory defaults. See

page 56 for InvisaPC Transmitter factory defaults.

If the active IP address is not the address of a valid InvisaPC Transmitter or this address is
unreachable, an error message is returned.

Transmitter Re-boot

The administrator can click the

Reboot

button to power-cycle the transmitter.

If the active IP address is not the address of a valid InvisaPC Transmitter or this address is
unreachable, an error message is returned.

«
...
49
50
51
52
53
...
»

Summary of Contents for InvisaPC DTX1000-R



























































Reviews:

No comments

Related manuals for InvisaPC DTX1000-R

Brand: D-Link Pages: 28

Brand: D-Link Pages: 2

DIR-655 - Xtreme N Gigabit Router Wireless

Brand: D-Link Pages: 3

Brand: D-Link Pages: 11

Brand: D-Link Pages: 12

Brand: D-Link Pages: 12

Brand: D-Link Pages: 24

Brand: D-Link Pages: 20

Brand: D-Link Pages: 44

Brand: D-Link Pages: 52

Brand: D-Link Pages: 103

Brand: Idis Pages: 123

Brand: Idis Pages: 29

Brand: Idis Pages: 28

DirectIP DR-1304P

Brand: Idis Pages: 82

Brand: iDirect Pages: 130

Brand: Rane Pages: 4

xCORE-200 Multi-channel Audio board

Brand: XMOS Pages: 112

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands