Chapte
r 2: Installation
724-746-5500 l www.blackbox.com
21
Table 2.1: Figure 3 Descriptions
Number
Description
1
PC or Workstation
2 InvisaPC
Transmitter
3
IP network – 100Mbps
4 InvisaPC
Receiver
5 User
Peripherals
–
keyboard, mouse,
monitor
To connect the InvisaPC Transmitter:
Before connecting the InvisaPC Transmitter to the remote workstation, ensure that the
resolution and the refresh rate of the remote workstation are supported by the InvisaPC
Transmitter. Set the screen resolution and refresh rate of the remote workstation.
Unsupported settings will cause blank video or distorted video at the Receiver.
1.
Turn off the remote workstation.
2.
The InvisaPC Transmitter has one USB connector. Connect it to a corresponding
USB port on the remote workstation (a USB 2.0 port on remote workstation for
best performance). Connect using the provided USB cable.
3.
Connect the video connector on the InvisaPC Transmitter to the appropriately
labeled port on the workstation using the provided DVI cable.
4.
Connect one end of the UTP cable to the InvisaPC Transmitter’s RJ-45 connector
and turn on the workstation.
5.
Route the other end of the UTP cable to the location you have chosen for the
InvisaPC Receiver. If necessary, you can extend the UTP cable via junctions or an
Ethernet switch (subject to normal Ethernet cabling practices).
