www.bkte.pl
BKT ACBS - installation and configuration manual of the access control system with RS485 bus interface
85
In the field Function select [021]:Automation Node Status
Select Triggering Method: Set output ON for unlimited time
Select Modulation Type: Two Short Pulses repeated every 1s
Click OK
This configuration is sufficient to log the use of the emergency
button and to indicate with buzzer. The data must be only
synchronize (see chapter 9.4 Data synchronising).
Additional LED signaling
To additionally indicate the evacuation state by the LED on the
reader, add the appropriate output lines:
Click Add.
In the pop up window:
Click on + in Output field
In the next opened window, select the LED of the cold/hot aisle
containment sliding door reader:
Drop down the Object->Name list and select LED_SYSTEM
output of the reader, which controls aisle door.
