www.bkte.pl
BKT ACBS - installation and configuration manual of the access control system with RS485 bus interface
48
Send settings to the device - click Send to Device button.
Ending the reader low level configuration
1.
In Roger VDM menu select Device-> Disconnect.
2.
Put the MEM jumper on the reader (only in AR131 and
AR132)
3.
Connect the reader back to the controller or slave set in the
cabinet.
8
SVC SOFTWARE
The Roger SVC software must be installed for the system to function properly. Once installed, the software runs as Windows service. The software
is responsible for communication with system controllers and writing information to the database. The service package must be installed only
on one computer, e.g. on a server.
8.1
SVC software installation
Download from http://www.roger.pl/en/and run the file
RogerSVCSetup.exe. Then follow the windows that appear.
It is necessary to select Install communication service
Installing:
Licence service
Integration service
Virtual controller service
is not needed.
