www.bkte.pl
BKT ACBS - installation and configuration manual of the access control system with RS485 bus interface
44
Set the controller's network parameters.
It is necessary to set the communication key. This is a kind of
password to access the controller.
1.
Select Tools->Set communication key from menu.
2.
Enter key. You can use only hex signs (0-9, A, B, C, D, E, F).
3.
Write the key down, as it will be needed at high level
configuration of the system.
4.
Click Set key button.
5.
Click Close button.
Send settings to the device - click Send to Device button.
Ending the controller low level configuration
1.
In Roger VDM menu select Device-> Disconnect.
2.
The controller will be rebooted.
