www.bkte.pl
BKT ACBS - installation and configuration manual of the access control system with RS485 bus interface
71
In the pop up window:
Enter the node name eg. Cab-01-LED1
Click OK
Set Default State to OFF
Untick Register events. It is not necessary to log LED events.
Click OK
It is now necessary to add input lines that will affect the state of
the LED1:
Select just created automation node Cab-01-LED12.
Click on Inputs tab.
Click Add.
In the pop up window:
Drop down the Input list and select available IN1 line (door
sensor)
Drop down the Function list and select [166]: Set Node ON
Toggle
Click OK
