www.bkte.pl
BKT ACBS - installation and configuration manual of the access control system with RS485 bus interface
69
The LED1 will be configured as an indication that the front door
of the cabinet is not closed. Similarly, LED2 may be configured to
indicate that the rear door of the cabinet is not closed.
The input lines of the reader will be used to check the door
status: IN1 - door sensor, IN3 - door handle sensor. Since these
lines have already been assigned in the configuration of the
door, in order to be able to use them again, you need to change
their properties to the multifunctional lines.
For this purpose:
In the system tree, right-click on System->Networks->
->DataCenter (configurable name)->C1 (configurable controller
name)->Inputs and select Open.
Select input C1_100_IN1
Click Edit
Tick Multifunction option
Click OK
Now you can use again the IN1-door sensor input for
configuration.
