CT-600-2
49
10.9
Service screen
The Service screen gives access to several functions, primarily related to configuration and service.
Communication setup
: explained in detail below in below section ‘Communication Setup’.
Event log
: the event log shows a record of the user history (log in and log out details).
Language
: the displayed language on HMI is changed here (no login required)
Unit
: the unit of the HMI can be changed here between metric (SI) or imperial.
Time setting
: the date and time are configured here.
Operating hours
: the running hours of each of the compressors are monitored to allow planning of service
and for diagnostic purposes.
About…
: the program version of the PLC and the HMI are shown.
10.10
Communication setup screen
The configuration of network settings, including the activation of the different modules (CM-SW-01, CM-IO
and M172) is done from this screen and requires user level “Service”.
Hotspots around the pictures of the different components shown in the network architecture on the left half of
the page act as links for access to information on that component, shown on the right side of the page. The
green line between the components shows the network connection, and the turquoise square next to each
component shows that it is communicating correctly.
The main components are selected using the buttons “+/-“ and “IOSP”, “OACH” and “ECOSYS” [1] and [2].
