Bison MMIB-20, Operator'S Manual

Page: 48 / 72

7. - Assemble the Tensor Body (27) o v e r t h e
Drawer (4) with the screw (28). Adjust the
Oppressor (29) with the Nut (6).
4. - Drawer
6. - 1/2’ Hex. Nut
27.- Tensor Body
28.- 5/16 x 2 Hex. Screw
29.- 1/2 x 3 Squared Head Oppressor
8.- Place the Screen (58) sliding it through the lower
side of the Hammers Rotor (11) using the guide stops
located on the inner walls of the Drawer (4).
Assemble the Feed Hopper (30) over the Drawer (4).
Secure from the front side by actuating the mauser
bolts (31). From the back side assemble the
Hopper Lock (32) and the key (33).
4. - Drawer
11. - Hammers Rotor
30. - Feed Hopper
31. - Mauser Bolt
32. - 3/8’ Lock Pin
33. - 1/8’ x 1’ Key
58.- Screen
59.- Hopper Lock
ASSEMBLY
27
27
29
28
28
28
29
4
6
6
30
4
32
33
31
58
11
59
43