Bison MMIB-20, Operator'S Manual

Page: 12 / 72

SAFETY RULES
This is the safety-alert symbol which means ATTENTION! BE
ALERT! YOUR SAFETY IS INOVOLVED! This safety alert symbol
indicates important safety messages in this manual. When you
see this symbol, carefully read the message below and be alert to
the possibility of personal injury or death.
DISTINGUISH SAFETY SIGNS
Whenever you see the words and symbols shown ahead and used
in this manual, you MUST consider the instructions as they are
related to personal safety.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in DEATH or SERIOUS INJURY.
WARNING: Indicates a potentially dangerous situation, if not
avoided could result in DEATH or SERIOUS INJURY.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, could result in MINOR INJURIES.
NOTE THE SAFETY MESSAGES
Before operating this equipment read all safety messages included
in this manual and on your machine signs. It is YOUR responsibility
to read and comprehend the safety section on this manual.
Remember that YOU are key in following safety messages. Good
safety practices not only protect you, but those who are nearby.
Study all aspects of this manual and make them part of your safety
program. Note that this section of security is only created for this
type of equipment. Put into practice other procedures and above
all usual precautions, REMEMBER THAT SAFETY IS YOUR
RESPONSIBILITY. YOU CAN AVOID SERIOUS INJURY OR
DEATH. This security section is meant to highlight some of the
basic safety situations that may occur during normal operation
and maintenance of this equipment, suggesting possible ways to
handle these situations. This section does NOT replace the safety
procedures that appear in other sections of this manual.
NOTE: This handbook covers general security practices for this
equipment.
SAFETY RULES
7