Bison MMIB-20, Operator'S Manual

Page: 10 / 72

POST-SALES INSPECTION
It’s advised that the following items are constantly checked during first hours of operation.
„
Fully check the machinery and certify there are no damaged parts. Repair or change if necessary.
„
Check that all safety covers shall be in place.
„
Check there are no loose or missing screws.
„
If possible, operate the hammer mill to verify it is functioning properly.
„
Check the Operator’s Manual in full with your Customer; emphasize the importance of a regular
and proper lubrication, as well as safety precautions.
Inspection Date __________________ Name and Signature_____________________________
MORNING OPERATION INSPECTION
Lube all points in need of daily lubrication and those that require lubrication at a recommended time.
„ Check that the strips tension is adequate.
„ Ensure that all screws are complete and that parts are tightened.
„ Check that all the pulleys are aligned one with respect to the other.
„ Check the wheels pressure.
„ Check that mounting components are safe.
„ Turn the feed hopper and verify there are no foreign bodies in the rotor area (loose screws,
rocks, etc.). Additionally, check that the rods that support the hammers have their latches in good
condition.
„ Ensure that the arrows are aligned one with respect to the other.
„ Grease all bearings or grease points that you consider the need to be lubed. Remember that
excessive grease is harmful as well.
„ Turn the pulleys manually and verify that the rotor will not bind.
¡WARNING! Possible entanglement between strips and pulleys.
SEASONAL INSPECTION
„ Check general state of the hammer mill (normal wear and tear, no bumps, no leaks in hoses, etc.).
„ Ensure that proper lubrication has been made.
„ Check the wheels pressure.
„ Check that the hammers are not damaged or show abnormal wear. Verify that strips are in good
condition.
„ While mill is operating in a stationary position, verify the functioning of moving parts. Check any
failure signal or operation and check there is no unusual vibration or noise.
INSPECTION LIST
5