Biral SWS-100-LW: SWS-200-LW, User Manual

Page: 43 / 75

Section 3 Commands and Responses
Sensor Responses
33
3.2 Sensor Responses
RESPONSE MEANING
BAD CMD
Your command was not understood by the sensor. Check the text
of the command and re-send.
COMM ERR
An error was detected in a character in the command. Re-send the
command.
OK
Command with no quantitative response was understood and
executed.
TIMEOUT
Command was sent with more than 10 seconds between
characters.
Re-send the command.
TOO LONG
Command message was longer than 24 characters including end
characters. Re-send the command.
Table 3-4 Sensor Responses