Biral SWS-100-LW: SWS-200-LW, User Manual

Page: 39 / 75

Section 3 Commands and Responses
Sensor Commands
29
3 COMMANDS AND RESPONSES
3.1 Sensor Commands
NOTE: All commands should be terminated with <Carriage Return> and <Line
Feed> (<crlf>, see section 1.3).
Command Function Response
Applicability
SWS-
100 200
A?
Send accumulated precipitation
message.
(Accumulated precipitation in mm)
,(Accumulation time in minutes).
xxx.xx (xxxx.x)
,xxxx
√
AC Clear accumulated precipitation. OK √
BB?
Send instantaneous value of
backscatter EXCO.
±xxx.xx √
BL?
Send instantaneous value of Total
EXCO less precipitation particle
component.
±xxx.xx √
BT?
Send instantaneous value of Total
EXCO .
±xxx.xx √ √
CA
Perform precipitation amount
calibration
(Calibration must be enabled).
See section 5.3 √
CE
Perform both forward scatter and
backscatter (Not SWS-100 – LW)
EXCO calibration. (Calibration must
be enabled).
See section 5.2 √ √
CO Enable calibration. OK √ √
CX Disable calibration. OK √ √
D? Send latest data message. See section 2 √ √
IDx
Set instrument identification number
displayed in data message.
Range x = 1 to 999. (Default = 1).
OK √ √
OP? Check Option Word configuration.
See section
1.4.1
√ √
OPxxxxxxxx
Set configuration options. See
section 1.4.1.
OK √ √
OSAM? Check automatic message setting.
See section
1.4.5
√ √
OSAMx
Set automatic message setting,
section 1.4.5.
OK √ √