USER MANUAL
BSLAB07_v18_ EN
Biosurgical S.L., part of Combat Medical Group
Page 10 of 39
•
Communication error warning
6
SYSTEM INSTALLATION
The PRS system is designed for use on a movable stand which is supplied with the
system. If placed on a table or other medical device cart, make sure that the surface of the
table or cart is sufficiently sturdy and large to ensure that it will not fall off.
1.- Check the system's identification label to make sure that the system's power supply
voltage matches the voltage of the country in which the system is to be installed.
NOTE
The system's default power specifications are as follows:
220-240 V ~ 50 Hz or 100-120V~ 50/60 Hz
2.- Connect the system to the mains using the cable supplied.
3.- Press the
“
On
”
button and you will see the green light come on. After a few seconds,
the touchscreen will come on and the programme will start running.
Summary of Contents for COMBAT MEDICAL PRS+
Page 16: ...USER MANUAL BSLAB07_v18_ EN Biosurgical S L part of Combat Medical Group Page 16 of 39...
Page 25: ...USER MANUAL BSLAB07_v18_ EN Biosurgical S L part of Combat Medical Group Page 25 of 39...
Page 26: ...USER MANUAL BSLAB07_v18_ EN Biosurgical S L part of Combat Medical Group Page 26 of 39...
