BIOS DVPro T10B3, User Manual, Page: 49 / 65

DVT10B3
－
46
－
５．
Confirming the change
１．
Start -> enter
“cmd.exe” to open command prompt window.
２．
Enter ipconfig /renew
３．
Enter ipconfig /all Check if the IP Address has changed
correctly.
2.8.2 IP Setup for Linux
１．
Open a Terminal Window.
２．
Enter # ifconfig eth0 192.168.50.X
(
＊
Put IP that is not used in the current network in
“X”.)
３．
Enter $ sudo dhclient then press enter key.
４．
Enter #ifconfig to confirm changed IP address