BIOS DVPro T10B3, User Manual, Page: 30 / 65

BIOS CORPORATION
－
27
－
2.6 Web-based Monitor and Setup via Ethernet
To monitor DVPro via Web management GUI, you can connect Ethernet cable to a host computer.
Ethernet parameter must be configured correctly before launching a Web browser (such as Internet
Explorer). To setup IP Address, please follow steps below.
●
Setup Mode
First press and hold both MODE and SELECT buttons at power on. The system will enter Parameters
Setup mode as shown on LCD display.
●
Default IP address
The default IP address of the product is 192.168.50.210
●
IP Address Setup
Press SELECT then MODE to setup IP address.
Use SELECT button to change the number of each digit.
Press MODE for rolling to next field.
Hold SELECT button then number will have number increase faster.
After setting up, press MODE and SELECT at the same to save the change
New IP address will not be effective till the unit reboot.
ARRAY PARAMETERS
SETTING
IP Address
192.168. 50.210
POWER DOWN
PLEASE!