BIOS DVPro T10B3, User Manual, Page: 37 / 65

DVT10B3
－
34
－
2.6.4 Setup of email notification
＜
Mail Setup
＞
Mail Setup
It allows you to change email notification parameters and send a test email.
It is necessary to login to Management Mode or Parameter Setting Mode before you can make the change.
Click on
[
Mail Setup
]
from the main menu.
＜
Page for setup mail parameters
＞
●
Sender Address DVPro@192.168.50.210
Up to 63byte alphabet, number,
“_”, “-“, “@”, and “.” is allowed. Two byte characters such as Chinese
are not allowed.
●
Receiver Address test@bios.co.jp
Up to two receiver addresses are allowed.
For users who want to have more than 2 receivers, you need to setup aliases on assigned email server.
Allowable characters are same as Sender address.
●
SMTP Server Address 255.255.255.255
Setup IP Address of SMTP server.
IP of 255.255.255.255 will prohibit emails to be sent out.
１）
Directly setup the IP to SMTP server
This is most effective way to issue email alert. However Gateway address might be necessary if
SMPT server is not within the same LAN domain. (See Basic Parameter, Setup page) At the same
time, this will expose the DVPro T10 to external network environment resulted in security issue.
２）
Assign local SMTP Server