BIOS DVPro T10B3, User Manual, Page: 42 / 65

BIOS CORPORATION
－
39
－
2.7 Setup Mode (Array Parameters Setting)
A power recycle of the RAID storage is necessary to get into Setup mode. Under Setup mode, you can
change all kinds of parameters for the controller.
Power on the RAID storage while holding both MODE and SELECT buttons (about 3 seconds)to enter
Setup Mode. ( LCD Display: ARRAY PARAMETERS SETTING )
Launch the web browser with preset IP Address to connect to the management GUI.
＜
Critical Parameters
＞
Click on Critical Parameters on main menu to enter Critical Parameters page.
＜
Critical Parameters Page
＞ ＜
Parameter Example: LUN Size
＞
Scroll to the parameter needed to be changed and click Change Parameters button to save it. Reboot the
RAID system to make new parameters effective. Press MODE button at first time power on to initialize the
RAID after the change.)
Warnings
Change of any critical parameters will result in whole data loss. After change, it is required to
re-create new partition and format the data volume