BIOS DVPro T10B3, User Manual, Page: 23 / 65

DVT10B3
－
20
－
NCQ MODE
NO QUEUING
NO Priority, NO Queuing, Read Priority*, NO
Reorder
Set up NCQ (Native Command Queue) support, default is READ Priority. Options are listed as below
NO QUEUING * : No Queuing
READ PRIORITY : NCQ ON, higher priority for READ command
NO REORDER : Queuing ON, command executed as first in first out
NO PRIORITY : Queuing ON, command executed as possible re-order without special priority
*Native Command Queuing supports usually have dependancy on host Operating System and SATA
Drive. When any abnormal behavior encountered, please set this parater to NO Queueing. To support
NCQ, host has to set up operating mode of connecting sata port as AHCI mode.
●Maximum negotiatable speed of drive channels
Disk Speed
3Gb/s
3Gb/s*, 6Gb/s
●Fan speed control temperature
Set up temperature criteria for fan speed control
FAN SPEED TEMP
45 deg. C
20, 30, 40, 45*, 50, 55, 60 deg C
When the detected temperature (RAID Core chip) is higher than the FAN SPEED TEMP, the fan will
be turned into high speed. DVPro is shipped with 50 degree set in advance.
●Flush cache command setup
Enable
FLUSH CACHE
Enable / Ignore
Enable or Disable
「
FLUSH CACHE
」
command function. Default is “Enable”
● Background Write Setup
WRITE BACK MAX
SIZE 2MB/CH
64KB / 128KB / 256KB / 512KB /
1MB / 2MB /4MB*
Setup the size of data stored in cache for Sequential Wrtie
When data size written to cache is bigger than the setup size, data will be partitioned to parts
。
● Write Retry Mode Setup