BIOS DVPro T10B3, User Manual, Page: 10 / 65

BIOS CORPORATION
－
7
－
No. Name Function Explanation
①
POWER Switch Power ON /OFF Switch
②
HDD Access / FAIL
LED
BLUE Flash upon access; Orange ON indicates an error
When
「
RAID-x RECOVERING 0%
」
shown on LCD, the FAIL LED on
means the HDD is under rebuilding
③
POWER LED Power ON LED indicator
④
ACCESS LED Host Access LED indicator
⑤
FAIL LED A controller error LED indicator
⑥
MODE Button
1
）
Parameter Initialization(Power on Initialization)
2
）
Configure parameters
「
See Chapter 2
」
3
）
Stop buzzer alarm(Buzzer stopped immediately by pushing one
time)
⑦
SELECT Button Setup Parameter
⑧
LCD Display
Message display screen. Show status of the system
Show parameters while doing configuration
⑨
Power Input AC Inlet
⑩
eSATA3 Connector eSATA host connector
⑪
USB3 Connector USB3 host connector
⑫
Ethernet Port RJ45 Fast Ethernet port for Web GUI management
⑬
Fan Module Fan 1
⑭
Fan Module Fan 2
⑮
Drive Module Disk Drive module 0 (to 9).Upper left one is number 0, and right is 1
● Both eSATA and USB3 cannot be applied to same LUN at the same
time.
For simulateneous usage of eSATA and USB3, two LUN mapping and
SWAP mode should be configured.