
Battery Error
1. The " " symbol is blinking when the battery power is low. Please
change the meter battery as soon as you can. You can still do the
test.
2. The " " and " " symbols are blinking when the battery is too
low. Meter can not do the strip test. Please change the meter battery
immediately.
Strip Error
1. When the test strip is inserted incorrectly, the meter will beep 4 times
while the " " symbol flashes. Do not apply a sample on the test
strip. Please re-insert the unused test strip correctly (refer to "Easily
Handling RIGHTEST Test Strip" on Page 23 for more information).
2. If, after performing the required steps, the " " and flashing
" " symbols appear on the screen, it means Test Strip has been
inserted incorrectly more than twice. Please, re-insert the unused test
strip again after reviewing the steps on how to insert a test strip
correctly on p.22 or contact Customer Service for support. This error
message can also indicate that you may have used the wrong test
strips. Please check the test strip vial to ensure you are using
RIGHTEST Test Strips.
47
46
Error messages and Trouble shooting
Error messages and Trouble shooting
If one of the above error messages still appears, please contact local Bionime distributor or email to
[email protected].
1a
2
1
2
Er1 -
The inserted test strip has been used or damaged. Please use a
new test strip from vial.
Er2 -
Meter has malfunctioned. Do the Quality Control Test or reinstall the
battery to check if the meter works properly.
Er3 -
Signal transmission is disrupted, repeat the test.
Er4 -
Applied blood volume is insufficient, repeat the test with a new test
strip.
Er5 -
An issue calibrating the Meter has occurred. Please follow the steps
below:
1. Remove the test strip from the meter.
2. Turn off the meter (press and hold the Main button for 3 seconds).
3. Press the main button to turn ON the meter.
If after turning on the Meter, you do not see Er5, your meter is
functioning properly and able to perform a test.
1b
Summary of Contents for Rightest GT100
Page 2: ......