BIONIME Rightest GT100 User Manual Download Page 20

37

36

Performing a Quality Control Test

CLOSE

1. Take one RIGHTEST Blood Glucose Test Strip from the vial and 

close the vial cap immediately.

 

2. Insert RIGHTEST Blood Glucose Test Strip with view window facing 

up, into test strip port.

3. While the blood drop icon is flashing on the display window, press 

and hold the Main button for at least 3 seconds until the "       " 
symbol appears.

4. You will see the blinking "

   

"

 

icon and "       " icon on the screen, 

prompting you to the apply RIGHTEST Control Solution.

 

5. Shake the bottle of RIGHTEST Control Solution well before opening 

the cap. Put cap off to side. 

 

6. Place a drop of RIGHTEST Control Solution into the cap.

 

7. Gently touch the sample entry of the strip with RIGHTEST Control 

Solution from the top of the cap.

8. When you hear a beep (if volume is turned on), the screen will 

display the test countdown from 5.

Performing a Quality Control Test

OPEN

5

6

9

CAUTION

- Your Control Solution results will not be calculated for average reading but can still be 

recalled. The Control Solution Test result will be shown with "      " symbol on the screen.

- Control Solution Test should be conducted between 15 - 40°C (59 - 104°F).

 

- Before "     " and "      " appears, don not touch RIGHTEST Control Solution to the sample 

entry on the strip. The GT100 Blood Glucose Meter is preforming an internal check, 
touching the Control Solution to the sample entry before prompted will result in an error 
message: "         " and RIGHTEST be accompanied by beeps (if volume is turned on). 

- Don't drip RIGHTEST Control Solution into the sample entry of the strip directly. The reagent 

on the strip might leak into the bottle of RIGHTEST Control Solution and may 

  cause the degeneration of RIGHTEST Control Solution. Doing this could also 

 contaminate the meter via the test strip port.

- Don't touch the tip of RIGHTEST Control Solution bottle. If you have touched 

it, please clean with water.

1

2

4

7

 

  9. Tightly replace the cap on RIGHTEST Control Solution bottle.
10. The Control Solution result will appears. Compare your Quality Control Test result 

  

to the Control Solution Range printed on RIGHTEST Blood Glucose Test Strip vial 
label.

Summary of Contents for Rightest GT100































Reviews: