BIONIME Rightest GT100, User Manual, Page: 15 / 30

27 26
Performing a Blood Test
7. Hold the hub in one hand and pull on the plunger with the
other hand. The device will be cocked. Release the plunger
and it will automatically move back to its original position
near the hub.
8. Wash your hands with warm soapy water and dry
thoroughly.
9. Take one RIGHTEST Blood Glucose Test Strip from the vial.
Close the vial cap immediately.
10. Insert the strip into the strip port of the RIGHTEST Blood
Glucose Meter with the indication symbol facing up. The
meter confirms the insertion of the strip with a beep (if
volume is turned on).
6
7
6. Choose a depth of penetration by rotating the top portion of the depth
adjustable cap until your desired depth setting is visible in the window. Settings
are based on skin type: " " for soft or thin skin; " " for average skin;
" " for thick or calloused skin.
8
NOTE
- RIGHTEST Blood Glucose Meter will automatically
detect the Code number on the strip. You don't have to
check the Code number on the meter display or strip
vial.
11. A blood drop icon will appear on the display window and
will be accompanied by a beep (if volume is turned on).
Apply the blood sample within 2 minutes.
12. Place the lancing device against your fingertip and press
the release button.
13. Touch and hold the drop to the edge of sample entry until
you hear a "beep" (if volume is turned on) and the view
window is filled with blood. If the view window is not
completely filled with blood the test will not start. Discard
the test strip and repeat with a new RIGHTEST Blood
Glucose Test Strip.
14. Countdown mode will begin on the display window. After 5
seconds, your test result will appear.
14
11
10 9
13a
12
13b
13c
Performing a Blood Test