BIONIME Rightest GT100, User Manual, Page: 21 / 30

39 38
Recalling Test Result and Average
RIGHTESTBlood Glucose Meter is able to automatically store a maximum of 500 test results with time
and date. If your meter has stored 500 results, the newest test result will replace the oldest one. To
recall your test memory, start the meter without a test strip inserted.
1. Press the Main button to switch from the time mode to the Memory screen. You
will see the "MEM" symbol in the upper left corner of the display. When you
press the Down button, the latest result will be displayed. By pressing the Down
button sequentially, former test results will be shown in historical order. You will
see the sequence number in the lower right corner and the year in the lower left
corner of the display followed by date and time of the measurement.
Note: The Up button is for reviewing the tests with the sequence number increasing, and the Down
button is for reviewing tests with sequence number decreasing. The sequence "1" is the latest
result while sequence "500" is the oldest test result.
2. To finish reviewing memory tests, press the Main button again. This will bring you to the Average
screen. By pressing the Down button, the display shows "AVG" in the upper right corner of the
display and the average value for the actual day. By sequencely pressing the Up or Down button
you will get to the 1-day, 7-days, 14-days, 30-days and 90-days average of your blood glucose
values. You will see the number of the calculated days in the lower left corner and the number of
the calculated readings in the lower right corner.
3. Non-Averaging set and canceled:
You may exclude unwanted or doubtful test results from the average calculation. After you finished your test in the
test mode, you can exclude the unwanted result. Keep pressing the Down button until you see the symbol
"
NO
AVG
"
in the top right corner of the screen. Press the Down button and the Main button simultaneously to confirm
the value as
"
Non average
"
.
Now this value is flagged by the symbol
"
NO AVG
"
in the upper right corner of the screen.
to cancel a non-averaging setting. Keep pressing the Down button until the
"
NO AVG
"
symbol changes to
"
AVG
"
in the upper right corner of the screen. To confirm this original status, simultaneously press the Main button to
confirm the
"
AVG
"
status. The value will be stored as a regular value and included in the average values.
Recalling Test Result and Average
NOTE
- The average function is related to the time setting. You must set the time correctly and have enough time
intervals on the basis of current inquiry time to make sure that the average test results will show. For
example, take the 14-day average; if your current inquiry time is 1/30, you must check that you have
tested blood glucose in the past 14 days before 1/30, including today. If not, the 14-day average will show
no will not show a figure.
- The Non-averaging/re-averaging function only works in test mode and when you get a value. This action
cannot be performed in mem mode.