Operating Instructions – MNT
2020-03-020.00
30
8.13 CONTINUOUS CUTTING
Release hand wheel stop.
For continuous cutting, press
to activate the
motor.
The LED on the left side of the button is illuminated, if the
motor is activated.
Select the stop position of the specimen head after
cutting. If
is selected, the specimen head will
stop at the highest position, if
is selected, the
specimen head will stop at the lowest position
when stopped.
Press
to start the motor. The footswitch can be
used alternatively.
The LED on the left side of the button is illuminated, if the
motor is running.
Press
to stop the motor. The footswitch can be
used alternatively.
i
As long as the motor is activated,
manual cutting is not possible.
Do not start motor functions with
activated hand wheel lock ! Failure
to comply may result in severe
damage to the instrument.
Activated cutting motor is shown by illumination of
the LED as displayed above.
Activation and running of cutting motor is shown
by illumination of the LEDs as displayed above.
Foot switch for control of the cutting motor.
