Operating Instructions – MNT
2020-03-020.00
27
8.6 FAST APPROACH TO SPECIMEN
Press
to move the knife holder base towards the sample.
Press
to move the knife holder away from the sample.
8.7 SLOW APPROACH TO SPECIMEN
Press
to move the knife holder base slowly towards the sample.
8.8 THICKNESS ADJUSTMENT FOR TRIMMING
To change the trimming settings, press
continuously and press
or
to increase
or decrease the value.
8.9 THICKNESS ADJUSTMENT FOR CUT
To change the cutting thickness, press
or
to increase or decrease the value.
8.10 TRIMMING OF SPECIMEN
Insert object holder.
Orientate specimen as desired.
Deactivate the hand wheel stop.
Release finger protection.
If Trim latching mode is activated, trimming function is
activated and deactivated by pressing
once.
Activation of trim latching is displayed as illustrated.
TUE 13:05:05
--TRIM--
Trim: 19µm
Cha: -20 °C (-22)
QF: 0
Status:OK
0000
If Trim latching mode is deactivated, trimming function is activated by continuously
pressing
.
Turn hand wheel evenly clockwise
