Operating Instructions – MNT
2020-03-020.00
36
Picture 2:
Picture 3:
Slide the UV lamp as shown into the glass bulb. Keep 2cm space before the
endposition will be reached, this place will be needed to connect the UV Lamp with
the connecting plug. (Pic. 2 & 3).
Picture 4:
The connector can be plugged into two
directions of polarity, a switch is
excluded.
Picture 5:
Picture 6:
Picture 7:
Once the plug is connected to the UV- Lamp, the final step can be done now and the
UV-Lamp unit can clip into the retaining clips.
