manualshive.com logo in svg

Binder TWG 01, Operating Manual, Page: 39 / 39

Share
Download
Binder TWG 01 Operating Manual Download Page 39

 

 

 

TWG 01 01/2011 

page 39/39 

 

11.5  Disposal of the unit in non-member states of the EC 

CAUTION 

 

 

Alteration of the environment. 

¾

  For final decommissioning and disposal of the oven, please contact BINDER service. 

¾

  Follow the statutory regulations for appropriate, environmentally friendly disposal. 

 

 

12.  Technical data 

Power supply: 

7.7 to 13.8 V DC 

Ambient conditions: 

0 °C / 

32 °F

 up to +40 °C / 

104 °F,

 max. 80% r.H. (non condensing) 

Quiescent current 

max. 25 mA (at 12 V DC) 

Rated current 

max. 100 mA (at 12 V DC) 

Recording time. 

max. 20 sec 

Transmission of a message:  max. 110 sec 

The product fully complies to guideline TBR 21. 

 

Symbol on the unit 

Information 

 

CE conformity marking 

 

Electrical and electronic equipment manufactured / placed on the market 
in the EC after 13 August 2005 and to be disposed of in separate 
collection according to directive 2002/96/EC on waste electrical and 
electronic equipment (WEEE). 

 

Summary of Contents for TWG 01








































Reviews:

No comments