manualshive.com logo in svg

Binder TWG 01, Operating Manual, Page: 13 / 39

Share
Download
Binder TWG 01 Operating Manual Download Page 13

 

 

 

TWG 01 01/2011 

page 13/39 

 

We recommend taking the electric power from a central alarm facility (as far as existing) with a backed-up 
power feeding 230V AC (e.g. battery buffer for PCs). Only then the alarm transmission 

during

 a power 

failure is guaranteed. The same is true when using the delivered 12V power supply unit. 

The max. power consumption of the TWG 01 is 1.2 Watt. Additionally for alarming 

during

 a power failure, 

it is necessary that the computer on which APT-COM™ 2.0 or the Watch Tool software is running is also 
connected to a backed-up power feeding (e.g. battery buffer for PCs). 

DANGER 

 

Incorrect power supply voltage when connecting the power supply unit. 

Electrical hazard. 

Danger of death. 

Damage to the power supply unit. 

¾

  Check the power supply voltage before connection and start-up. 

 

 

To completely separate the unit from the power supply, you must disconnect the power plug. 
Install the unit in a way that the power plug is easily accessible and can be easily pulled in 
case of danger.  

 

5.3.3  Putting in / changing the interchangeable plug adapters of the power supply unit 

The delivered power supply unit covers a power supply tension range from 90V AC up to 264V AC and 
provides 4 interchangeable plug adapters for Europe, UK, Australia, and the USA. It is thus suitable for all 
tensions between 90V and 264V AC 50/60Hz worldwide. 

The interchangeable plug adapters accompany the unit and can be used as required. 

To put in or change the interchangeable plug adapters proceed as described following: 

 

 

 

 

 

 

 

 

Figure 6: TWG 01 and power 
supply unit in state of delivery. 

Summary of Contents for TWG 01








































Reviews:

No comments