Binder KBF 115, Operating Manual

Page: 58 / 155

KBF + KMF (E6) 07/2017 page 58/155
“Ramp” and “Step” mode example (representation of a temperature course)
W/°C
t/min.
0
20
40
60
80
100
10 30 40 60 70 100 130
1 2 3 4 5 6 7 8
Corresponding program table
Section No.
Duration
[hh:mm:ss]
Temperature
[°C]
Humidity
[% rH]
Fan
[%]
Ramp or Step
1 00:10:00 40.0 xxxx xxxx Step
2 00:20:00 60.0 xxxx xxxx Step
3 00:10:00 80.0 xxxx xxxx Step
4 00:20:00 40.0 xxxx xxxx Step
5 00:10:00 40.0 xxxx xxxx Ramp
6 00:30:00 80.0 xxxx xxxx Ramp
7 00:30:00 80.0 xxxx xxxx Ramp
8 00:00:01 20.0 xxxx xxxx Ramp
9.7.3 Special controller functions via operation lines
You can define the switching state of up to 16 operation lines (control contacts). They are used to activate
/ deactivate special controller functions.
•
Operation line “Humidity off” serves to turn off the humidity.
•
Operation line Idle mode” activates / deactivates the operating mode “Idle mode”.
The other operation lines are without function.
Use the Section editor to configure the operation lines.
Section view.
Select the field “Functions on/off”.
“Functions on/off” entry menu.
Mark / unmark the checkbox of the desired
function to activate / deactivate it and press the
Confirm icon.
The controller returns to the section view.