Binder KBF 115 Operating Manual Download

Page: 52 / 155

KBF + KMF (E6) 07/2017

page 52/155

Program editor: “Edit program” menu

Select the desired function and press the

Confirm

icon.

The program editor offers following options:

•

Change the program name

•

Copy program

•

Replace program: Replacing an new or an existing program with the copied program. This menu point

is visible only after a program has been copied.

•

Delete program

•

Add new section

To add a new section, select “Add new sec-
tion” and press the

Confirm

icon.

The program view opens.

Program view.

A new section is always added at the very bot-
tom (example: section 2).

9.5.1 Deleting a time program

Path:

Main menu > Programs > Time program

In the “Time program” menu select the program to be deleted. The program view opens.

In the

program

view

press the

Edit

icon to open the program editor

In the

program

editor

select “Delete program” and press the

Confirm

icon.

The program is deleted. The controller returns to the program view.

Summary of Contents for KBF 115




























































































































































Search results

Summary of Contents for KBF 115

Reviews:

Related manuals for KBF 115

Brands by name

Popular brands

Binder KBF 115, Operating Manual

Search results

Summary of Contents for KBF 115

Reviews:

Related manuals for KBF 115

Brands by name

Popular brands