Binder KBF 115 Operating Manual Download

Page: 38 / 155

KBF + KMF (E6) 07/2017

page 38/155

5.5

Controller menu structure

Use the

navigation icons

in the screen footer in Normal display to access the desired controller func-

tions.

The available functions depend on the current

authorization level

“Service”, “Admin” or “User” (chap.

13.1). This is selected either during login or can be available without password protection.

Main menu:

program settings, further information, “Service” submenu.

The “Settings” submenu allows general configuration of the controller.

chap. 5.5.1

List of

active alarms

chap. 11

Access to the

event list

chap. 15.2

Setpoint entry

for Fixed value operation, turning on/off

humidity control

afety controller

settings

chap. 7, 6.3,
12.2

Start/ pause/ cancel an already entered, respectively a running

time

program

or start / cancel an already entered, respectively a running

week program

chap. 9.1,
9.2, 10.1

Unless noted otherwise, the figures show the functional range, which is available for the user with “Ad-
min” authorization level.

Summary of Contents for KBF 115




























































































































































Search results

Summary of Contents for KBF 115

Reviews:

Related manuals for KBF 115

Brands by name

Popular brands

Binder KBF 115, Operating Manual

Search results

Summary of Contents for KBF 115

Reviews:

Related manuals for KBF 115

Brands by name

Popular brands