Binder 9010-0269, Operating Manual

Page: 14 / 69

FDL (E2) 03/2011 page 14/68
DANGER
Electrical hazard.
Danger of death.
∅
The unit must NOT become wet during operation or maintenance.
The safety / paint drying ovens were produced in accordance with VDE regulations and were routinely
tested in accordance to VDE 0411-1 (IEC 61010-1).
If a warning signal which indicates an of error condition, no further charging material must be introduced
into the unit.
DANGER
Explosion and ignition hazard.
Danger of death.
∅
Do NOT introduce any further charging material as long as there is a warning signal.
During and after the drying process, the inner surfaces have got a temperature close to the set-point.
CAUTION
The inner chamber, the outgoing air pipe, the door window (option), the door gasket,
and the access ports will become hot during operation.
Danger of burning.
∅
Do NOT touch the inner surfaces, the outgoing air pipe, the door window, the door gas-
ket, the access ports, or the charging material during operation.
1.6 Intended use
The BINDER safety / paint drying oven FDL 115 is suitable for drying and burn in of lacquers and similar
liquid coating materials which are containing solvents that can form explosive mixtures with air. The
maximally permitted drying temperature and the maximally permitted quantity of solvent are limited, see
chap. 1.9.
Other applications are not approved.
Do NOT use the unit to warm up coating materials in containers, vessels, etc. or for drying textiles
soaked in solvent.
Do NOT use the unit for drying purpose if greater quantities of steam or solvent gas leading to condensa-
tion will be set free.
Following the instructions in this operating manual and conducting regular maintenance work
(chap. 14.1) are part of the intended use.
1.7 Operating instructions
Depending on the application and location of the unit, the operator of the safety / paint drying oven must
provide the relevant information for safe operation of the unit in a set of operating instructions.
These operating instructions must be kept with the unit at all times in a place where they are
clearly visible. They must be comprehensible and written in the language of the employees.