WR1500N
150Mbps Wireless N Router
Note:
1. After a device is successfully added to the network by WPS function, the WPS LED will keep
on for about 5 minutes and then turn off.
2. When press and hold the WPS/Reset Button for more than 5 seconds, you will reset the
router.
1.4.2 The Rear Panel
Figure 1-2 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
POWER:
The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this WR1500N 150Mbps Wireless N Router.
ON/OFF:
The switch for the power.
WAN:
This WAN port is where you will connect the DSL/cable Modem, or Ethernet.
1,2,3,4 (LAN):
These ports (1, 2, 3, 4) connect the Router to the local PC(s).
Wireless antenna:
To receive and transmit the wireless data.
- 4 -
