WR1500N
150Mbps Wireless N Router
address is proper MAC address, click the
Clone MAC Address
button and your PC’s
MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address
into the "WAN MAC Address" field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the
Save
button. It will take effect after rebooting.
Figure A-3 MAC Clone
3. I want to use NetMeeting, what do I need to do?
1) If you start NetMeeting as a sponsor, you don’t need to do anything with the Router.
2) If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3) How to configure Virtual Server: Log in to the Router, click the “
Forwarding
” menu on the
left of your browser, and click "
Virtual Servers
" submenu. On the "
Virtual Servers
" page,
click
Add New…
. Then on the “
Add or Modify a Virtual Server Entry
” page, enter
“1720” for the “Service Port” blank, and your IP address for the “IP Address” blank, taking
192.168.0.169 for an example, remember to
Enable
and
Save
.
Figure A-4 Virtual Servers
Figure A-5 Add or Modify a Virtual server Entry
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
- 59 -
