WR1500N
150Mbps Wireless N Router
Figure 4-38 Static Routing
To add static routing entries, follow the steps below.
1. Click
Add New…
shown in Figure 4-38, you will see the following screen Figure 4-39.
Figure 4-39 Add or Modify a Static Route Entry
2. Enter the following data.
Destination IP Address
-
The
Destination IP Address
is the address of the network or host
that you want to assign to a static route.
Subnet Mask
-
The
Subnet Mask
determines which portion of an IP Address is the network
portion, and which portion is the host portion.
Gateway
-
This is the IP Address of the gateway device that allows for contact between the
Router and the network or host.
3. Select
Enabled
or
Disabled
for this entry on the
Status
drop-down list.
4. Click
the
Save
button to make the entry take effect.
Click the
Delete
button to delete the entry.
Click the
Enable All
button to enable all the entries.
Click the
Disable All
button to disable all the entries.
Click the
Delete All
button to delete all the entries.
Click the
Previous
button to view the information in the previous screen, click the
Next
button to
view the information in the next screen.
- 44 -
