Billion BiPAC 7800GZ User Manual Download

Page: 102 / 183

WAN Profile

ADSL

PPPoE (ADSL)

PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using
PPP.

Description:

A given name for the connection.

VPI/VCI:

Enter the information provided by your ISP.

Encap. method:

Select the encapsulation format. Select the one provided by your ISP.

Username:

Enter the username provided by your ISP. You can input up to 256 alphanumeric

characters (case sensitive).

Password:

Enter the password provided by your ISP. You can input up to 32 alphanumeric

characters (case sensitive).

Service Name:

This item is for identification purposes. If it is required, your ISP will provide you

the necessary information. Maximum input is 32 alphanumeric characters.

NAT:

The NAT (Network Address Translation) feature allows multiple users to access the Internet

through a single IP account by sharing a single IP address. If users on your LAN have their own
public IP addresses to access the Internet, NAT function can be disabled.

IP (0.0.0.0:Auto):

Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to

automatically obtain an IP address from your ISP.

Auth. Protocol:

Default is Auto. Please consult your ISP on whether to use Chap, Pap or

MSCHAP.

Obtain DNS:

A Domain Name System (DNS) contains a mapping table for domain name and IP

addresses. DNS helps to find the IP address of a specific domain name. Check the checkbox to
obtain DNS automatically.

Summary of Contents for BiPAC 7800GZ
























































































































































































Search results

Summary of Contents for BiPAC 7800GZ

Reviews:

Related manuals for BiPAC 7800GZ

Brands by name

Popular brands

Billion BiPAC 7800GZ, User Manual

Search results

Summary of Contents for BiPAC 7800GZ

Reviews:

Related manuals for BiPAC 7800GZ

Brands by name

Popular brands