Billion BiPAC 7800GZ User Manual Download Page 10

Page: 10 / 183

Management

• Easy Sign-On (EZSO) and Auto-scan ADSL settings

• Web-based GUI for remote and local management

• Firmware upgrades and configuration data upload and download via web-based GUI

• Embedded Telnet server and SSH for remote and local management

• Available Syslog

• Mail Alert for WAN IP Changed, Failover indication

• Wake on LAN

• High availability (device redundancy)

• Supports DHCP server / client / relay

• TR-069

supports remote management

• SNMP v1/v2/v3

supports remote and local management

Hardware Specifications

Physical Interface

• 3G wireless: 2pcs. x 3G antennae

• Power jack

• Power switch

• Factory default reset button

• WPS push button

• SIM slot: (for the SIM card from Telco / ISP)

• Ethernet: 4-port 10 / 100Mbps auto-crossover (MDI / MDI-X) Switch

• EWAN: Ethernet port #4 can be configured as a WAN interface for connecting to

ADSL / Cable / VDSL / Fiber modem device

• DSL: ADSL port

• WLAN: 1pce x 2dBi detachable antenna

Summary of Contents for BiPAC 7800GZ
























































































































































































Search results

Summary of Contents for BiPAC 7800GZ

Reviews:

Billion BiPAC 7800GZ, User Manual, Page: 10 / 183

Search results

Summary of Contents for BiPAC 7800GZ

Reviews: