36
PPPoA Connection
VPI/VCI:
Enter the information provided by your ISP.
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric
characters (case sensitive).
Encapsulation method:
Select the encapsulation format. Select the one provided by your ISP.
Authentication method:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or
MSCHAP.
IP Address:
Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
Obtain DNS Automatically:
A Domain Name System (DNS) contains a mapping table for
domain name and IP addresses. DNS helps to find the IP address for the specific domain name.
Check the checkbox to enable this function.
Primary DNS/Secondary DNS:
Enter the primary and secondary DNS.
MTU:
M T U
(
Maximum Transmission Unit) is the size of the largest datagram (excluding
media-specific headers) that IP will attempt to send through the interface.
Summary of Contents for BiPAC 7800GZ
