5.0
Operation
5.11
Stacking (Manual)
WARNING:
While it is possible to stack manually,
it is recommended to auto stack. Unless operated
by a competent user, it is likely the machine could
get damaged.
A. Ensure you are in Stack mode.
1. Carry out the same checks as in Stacking (Automatic).
2. Press the bottom right button and push the joystick to the
right
(Fig. 34)
to hook the bales.
3. Press the bottom right button and move the joystick
forward
(Fig. 35)
and hold until the table is fully raised and
the bales are positioned on the platform
(Fig. 36)
.
4. Hold down the middle button and push the joystick forward
(Fig. 37),
hold until the hooks are fully out.
5. Hold down the middle button and push the joystick left
(Fig. 38),
hold until the table returns to its bottom nylon
stops.
17
Fig. 36
Fig. 34
Fig. 35
Fig. 37
Fig. 38
Summary of Contents for Transtacker Extra
Page 2: ...2 ...
Page 34: ...10 0 Electrical Hydraulic Systems 34 Fig 92 10 2 Hydraulic Diagram ...
Page 35: ......
