6.0
Adjustments
6.7
Control Box Timers
6.8
Changing Settings
1. From the work screen (any mode - Field or Stack). Use
button ‘B’ to access bale count screen
(Fig. 85)
.
2. Screen should now display the following bale counters:
Note on this screen holding button ‘B’ resets the resettable
bale count to zero. There is no user method for resetting the
machine total.
In this screen press button ‘A’ (ABC) to go into the settings
menu
(Fig. 86)
.
3. Screen should now display 1st settings screen.
Use the rotary device to highlight the settings group you
would like to go into. Note with entering the password the
user can only go into the timers and diagnostics menu.
Once the correct settings group is highlighted, either press
the ‘A’ (tick) button or press down on the rotary device to
enter the next settings screen
(Fig. 87)
.
4) Screen should now display settings:
Use the rotary device to scroll through the changeable
settings. Once user has got to the desired setting to
change, either press the ‘A’ (tick) button or press down on
the rotary device.
The setting value should now be highlighted. Now using the
rotary device the setting value can be increased or
decreased to new desired value.
Once the desired value has been reached, again press
either the ‘A’ (tick) button or press down on the rotary
device. Value will no longer be highlighted and new value
has been saved to control system.
Press D (back arrow) to return to work modes.
Note Button ‘B’ pressed for 5 seconds will reset the value to
it's factory default
(Fig. 88)
.
Fig. 84
Fig. 85
Fig. 86
Fig. 87
Fig. 88
28
Timer No.
Description
Normal Setting
1
Table extension
3.5 sec.
2
Pick up lift to waiting position
1.5 sec.
3
Tines in
1.5 sec.
4
Tines out
1.5 sec.
5
Auto table retract ‘crush’
2.0 sec.
6
Platform full run on
0.2 sec.
Timers
Manual Speeds
Auto Speeds
Creep Speeds
Diagnostics
Tines In
Time taken to insert
pickup tines into bale
s
1.5
30
Resettable Bale Count
123
Machine Total Bale Count
1525
Summary of Contents for Transtacker Extra
Page 2: ...2 ...
Page 34: ...10 0 Electrical Hydraulic Systems 34 Fig 92 10 2 Hydraulic Diagram ...
Page 35: ......
