5.0
Operation
18
5.12
The stacking cycle is complete.
To manually tie a layer
A. Ensure you are in Stack mode.
1. Carry out the same checks as in Stacking (Automatic).
2. Hold down the bottom right button and move the joystick
right
(Fig. 39)
to hook the bales.
3. Hold down the bottom right button and move the joystick
forward
(Fig. 40)
momentarily to lift the table clear of the
pickup.
4. Hold down the middle button and move the joystick right
(Fig. 41)
until the table is forward approximately 150-
300mm and clear of its bottom nylon stops. Hold down the
top left button and push the joystick right
(Fig. 42)
until the
table is fully rotated 90°.
5. Hold down the bottom right button and move the joystick
forward
(Fig. 43)
until the table is fully erect.
6. Hold down the bottom right button and push the joystick
left
(Fig. 44)
until the table is fully retracted.
7. Hold down the middle button and push the joystick
forward
(Fig. 45)
until the hooks are out.
Fig. 39
Fig. 40
Fig. 41
Fig. 42
Fig. 43
Fig. 44
Fig. 45
Summary of Contents for Transtacker Extra
Page 2: ...2 ...
Page 34: ...10 0 Electrical Hydraulic Systems 34 Fig 92 10 2 Hydraulic Diagram ...
Page 35: ......
