BIG ASS FANS Pivot 180, Installation Manual

Page: 9 / 60

PIVOT™ 180
3
WWW.BIGASSFANS.COM ©2011 DELTA T CORP. ALL RIGHTS RESERVED
PIVOT™ 180
Parts included
Note: Drawings are not to scale.
Hardware
Lower Yoke Hardware
(2) 1/2-13 x 4-1/2” GR 8 Bolt
(4) 1/2” Flat Washer
(2) 1/2-13 Nylock Nut
Main Fan Unit Hardware
(4) 1/2-13 x 1-3/4” GR 8 Bolt
(8) 1/2” Flat Washer
(4) 1/2-13 Nylock Nut
Winglet Hardware
(6) 10-24 x 1/2” Bolt
(6) 10-24 x 3/4” Barrel
Airfoil Hardware
(12) 5/16-18 x 2-1/4’’ GR 8 Bolt
(36) 5/16’’ Flat Washer
(12) 5/16-18 Nut
Column Mount Hardware
(4) 1/2-13 Threaded Rod
(4) 3” Square Washer*
(16) 1/2” Flat Washer
(16) 1/2-13 Hex Nut
(8) 1/2-13 Nylock Nut
*Square washers are packaged in the Main
Fan Unit box.
Safety Cable Mount Hardware
(2) 1/2-13 Threaded Rod
(12) 1/2” Flat Washer
(8) 1/2-13 Hex Nut
(6) 1/2-13 Nylock Nut
(1) 1/2-13 x 5” Hex Head Bolt
(1) 1/2-13 x 4-1/2” Hex Head Bolt
(3) Safety Cable Spacer (not pictured)
Structural Stability Hardware*
(12) 1/2” Flat Washer
(2) 1/2-13 x 4-1/2” GR 8 Bolt
(4) 1/2-13 x 1-1/2” Screw
(6) 1/2-13 Nylock Nut
Pre-Installation (cont.)
What’s in the box (cont.)
Structural
Stability
Box*
Torsion Tube
(2) Lower
Stability Bracket
(2) Upper
Stability Bracket
Safety Cable
(2) Attachment Channel (4) Beam Clip & Spacer Safety Cable
*The Structural Stability Package is only included if ordered.
*The Structural Stability Package is only included if ordered. An Extender package is required if the fan is mounted higher than 14 ft.
Hardware